How much torque can a Dana 60 handle?

How much torque can a Dana 60 handle?

Max torque short duration: 5550 Lbs. Ft. Continuous: 1500 Lbs. Ft.2010-04-04

How do you tell the difference between a Dana 60 and Dana 70?

The Dana 60 has a 9.75″ ring gear, while Dana 70 has a 10.5″ ring gear. The variety of Dana 60 and Dana 70 applications is confusing: Dana 60 axles are available in front and rear fitments; Dana 70s are more likely to be rear, but front axle Dana 70 axles exist (International used them, as did Dodge for a time)2020-01-18

What is the weight rating on a Dana 60 front axle?

Inside The Strongest Dana 60 Ever Built Keep in mind the original Dana 60 was designed for a 1-ton pickup with a 4,500-pound front gross axle weight rating (GAWR), 29 1/2-inch-tall tires, 4.10 axle gears, and engines that made less than 170 hp.2009-06-01

Is a Dana 60 stronger than a Ford 9 inch?

We know from long experience that a fully built 9-inch Ford is better and stronger than a Dana 60.” —Mark Williams, Mark Williams Enterprises. With its 2.250-inch offset, the 9-inch Ford’s hypoid distance is greater than popular competitors, most of which are at 1.5 inches or even less.2017-02-18

Is a Dana 60 a good axle?

Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling.2017-06-06

What is the strongest rear end?

Dana 60 Rear End Assemblies If you want a big brute of a rear end under your car, look no further than a Dana 60. Even in the heyday of muscle cars, Dana 60 rear differentials were renowned for their strength, along with their difficulty to locate.2018-10-05

READ  How many original McDonald's are left?

Is there a Dana 40?

There is no dana 40. You’re thinking of the Dana 44. It’s a medium duty axle that has been used as both a front and rear axle over the years. As a front axle, it was used in 1/2 and 3/4 ton pickup trucks made by every domestic truck manufacturer at one time or another.2012-10-11

How do I know if I have a Dana 60 or 70?

Luckily, it’s pretty easy to tell which axle you have. The original factory axles in a Full Float Dana 60 always have 30 splines or less. If you pull an axle shaft out of your Dana and it has 33 or 35 splines, then you probably have a Dana 70.2019-12-11

How strong is a Dana Super 60?

Dana 60 rear axle The semi float axles have GAWR up to 5,500 lbs and the full float axles were rated up to 6,500 lbs.

How much can a Dana 60 handle?

The Dana 60 can easily handle drivetrains producing 600 horsepower, and is commonly accepted as the strongest passenger car axle you can find. The Dana 60 is also quite adaptable. Just about any ring and pinion combination you want between 3.54:1 and 7.17:1 is still readily available.prieš 4 dienas

Is a Dana 60 a good rear end?

Dana 60 Rear End Assemblies If you want a big brute of a rear end under your car, look no further than a Dana 60. Even in the heyday of muscle cars, Dana 60 rear differentials were renowned for their strength, along with their difficulty to locate. Today, they’re actually incredibly easy to find.2018-10-05

READ  How is the Sienna in snow?

Are Dana 44 axles good?

At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling. The Dana 44 is also a heavy axle, but it’s significantly lighter than a Dana 60.2017-06-06

How much weight can a Dana 60 handle?

Dana 60 rear axle Manufactured in both full float and semi float variations. The semi float axles have GAWR up to 5,500 lbs and the full float axles were rated up to 6,500 lbs. Full floating variants are common while Semi-floating axles exist, but are less common.

What is the best rear end for drag racing?

Ford 9″- The Ford 9″ is definitely the most popular of the rear ends in drag racing. It offers good strength characteristics and the largest variety of gear choices. The thirdmember type center section allows a racer to have multiple gear ratios available and is much easier to change than a rear loading type rear end.

Are Dana 60s strong?

The Dana 60 has a larger ring gear, larger axle tubes, larger axle shafts, and overall is much stronger. All that extra strength, however, add a lot of weight. Adding more unsprung weight to your rig will make it handle worse on and off the road.2017-06-06

What is the best rear end for street racing?

The Ford 9-inch rearend is easily the most popular in racing, but most Street Stock racers run a GM metric chassis like a Monte Carlo.2013-12-30

How do you tell if you have a Dana 70?

One way to tell if you have a Dana 60 or Dana 70 is to measure the cover flange height (yellow arrow). The Dana 60 flange height is approximately 1″ high. The Dana 70 flange height is about 1¼” high.

READ  How old is kid Kakashi?

How much HP can a Dana 60 take?

Additionally, the Dana 60 (S60) from Strange comes equipped with their beefy 35-spline alloy axles and carrier that can handle over 1,000 horsepower. A vintage Dana 60 like ours with its stock 23-spline axles and clutch-type Sure-Grip is limited to roughly 700 horsepower of sticky tire, strip action.2017-09-08

How do you tell if you have a Dana 60?

Many Dana axles have the model ID cast into the fins or centersection. Look for a “44” or “60” cast into the reinforcement ribs. The number can usually be found on the lower right side rib below the differential cover, but it may also be found on other ribs or on top of the main cast structure.2020-03-23

What is the best gear ratio for drag racing?

– The trans gear ratio that is 1:1 will make the most power as it is the most efficient. For example, a 4 speed manual trans with 1:1 will make more power than 3rd gear. 2nd and 1st gear will make progressively less power.2011-02-23

Is a Dana 60 a 1 ton axle?

The Dana 60 and Dana 70 are two heavy-duty variants in the Dana axle line, and are typically found in 3/4 ton and 1 ton pickup trucks.2020-01-18

Used Resourses:

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *