When should I use an electric planer?
And electric planer: It shaves and shapes wood like a hand plane, a belt sander and a jointer all rolled into one. This article shows you how to get the most out of your power planer. Use it for leveling joists, making stubborn doors close easily and for building projects in your workshop.2018-10-02
Is a belt sander better than a drum sander?
In modern workshops, the wide belt sander is most common, as they’re generally more versatile and easier to work with. They also don’t require high amounts of emergency to run, unlike drum sanders.2021-10-20
What is the proper method of finish sanding?
In general, it’s best to sand with the grain of the wood, especially for the final grits. But to remove deep scratches and stains, it’s OK to angle across the grain, up to about 45 degrees for the initial sanding. This goes contrary to popular opinion, but it’s a good method to remove material quickly.2019-08-26
Do you really need a planer?
Most woodworkers know that you need both a planer and a jointer to get the most out of rough lumber (at least for power tool users). The jointer is used to flatten one face and square up one edge and the planer is then used to make the second face flat and parallel to the first.
Which sander should be used for fine finish work?
Orbital Sanders Are the Best Type of Sander for Fine Jobs As you may have guessed, the orbital sander operates using an orbital action. This is the best hand sander for fine-finish sanding, but it is not efficient for jobs that require the removal of a lot of stock on a large surface.2019-05-16
How do you flatten an uneven board?
In order to flatten a warped, twisted, or cupped board, a common approach is to first use a jointer to create one perfectly flat face. Then you run the board through a thickness planer with the flat face downward, and the planer makes the top face parallel to the bottom.
Is it worth getting a drum sander?
Drum sanders are a safer bet than planers when dealing with end grain. They can take many different grits. Drum sanders have the potential to sand wood panels and loose sticks up to 320 grit with comfort. They do work better when the grits are below 180 because the dust load can clog the finer grits quickly at times.
Can you use a drum sander for finish sanding?
Drum sanders, on the other hand, are best for finish sanding and smoothing. They typically remove between 0.005 and 0.007 inch of materials for a single pass while planers take away 0.125 and 0.250 inch. This is one of the reasons why you’ll want a drum sander if you’re working with thin stock like veneer.2021-03-30
What type of sander gives the best finish?
Random orbital sanders
Do I need orbital or drum sander?
“If your floor is in rough shape, cupped or damaged, or has a very heavy finish, a drum sander is what you need,” he adds. “An orbital won’t relevel your floor.”2011-01-27
How do I know what sandpaper to use?
Coarse grits are typically in the 40- to 50-grit range. Medium sandpaper, ranging from 60- to 100-grit, accommodates some final shaping. Primary sanding of rough wood and the removal of planning marks on wood is often best done with medium-grit sandpaper. Fine sandpapers range from 120- to 220-grit.2019-10-30
What type of sanding is the belt sander good for?
Belt sanders are highly effective tools for removing roughness and preparing woodwork for less aggressive tools in the process like random orbit and finishing sanders. It is crucial to belt-sand with the wood grain rather than across it. Otherwise, the belt sander’s lateral action can ruin the work.2019-02-25
How do you flatten a crooked board?
To flatten a warped piece of wood, you’ll need to change the moisture content on one side of the board. Look at your warped board and identify the inside face of the “C” or cup. The wood fibers on this side of your board are dryer and have shrunk. You can use water to relieve the tension and allow the board to flatten.
What grit should I use on drum sander?
Putting on the Grits Most times, I have either 80 or 120 grit paper on the drum. This grit is perfect for removing milling marks from the planer. And although I recommend against heavy thicknessing, these lower grits will certainly allow you to sneak up on the exact thickness you are looking for.
Is it worth getting a planer?
If you really want to get into woodworking, a thickness planer is worth the cost. Once you have it, you’ll never regret the expenditure, because you’ll be in control of your stock thickness like never before.2016-06-28
Can you finish with a drum sander?
A Drum Sander is NOT a Planer But its probably best if you only consider the drum sander as a finish sanding tool. Removing too much stock at one time will result in tremendous heat buildup, burnt sandpaper, blown fuses, and a screwed up piece of wood.